Author: admin February 11, 2018 0 Comments

HOIS260113 Wall Mounted Folding Shower Seat Installation Instructions

High Strength Plastic Folding Shower Seat The shower seat is composed of ABS plastic material, has painting finish that decorates shower seat modern look, we have various colors for you to choose. Item Id: HOIS260113 Material: Aluminum, ABS Plastic Color: Gold, Grey, White Length: 13.4″(34cm) Weight Limit: 330 lb (150 kg) Price Range: $$ Get it now on HomeRises.com

HOIS260113 type shower seat is easy to be installed and has heavy load-bearing with novel structure. Please read the specifications before installing, then makes you install more conveniently. Wide range of colors and quality assurance, Let your life more relaxed.

Note:
1) This Shower Seat Is Only For Solid Wall. The weight capacity of solid wall would not exceed 150kg, but the shower seat frequency is high, if there is a bit overweight person on your family, you had better equip with shower seat with feet in order to keep long-term safety.
2) Please wipe the water after finishing using, that cares about the shower seats.
3) Wipe with sofa rag in avoid of touching corrosive liquid, and keeps it clean after using.

HOIS260113 Type Shower Seat, Parts List
1) Seat Main Body
2) 5 Pcs Of Plastic Expansion Sleeve In 60 Mm Long And 8mm Diameter
3) 5 Pcs Of Long Screw In 60mm Long
4) Installation Panel
5) 2 Pcs Of Internal Check Screw

HOIS260113 Type Shower Seat, Installation Steps
1. Please place the fixed plate (04) on the wall within the flat, the side with three holes upwards and keeps horizontal, it is about 400-500mm distance from bottom to floor, mark with a pencil, then after taking fixed plate down and use the 8mm drill to drill 5 holes in the tag, the hole has 60mm depth, then take the expanding sleeve (02) into the hole.
2. Put the fixed plate (04) away again, and screw the locking screw (03) down.
3. Fasten the seat (01) to the top of fixed plate (04) totally, until the bottom inside reaches the wall, then keep the aluminum base and fixed plate at both ends of surface.
4. Use the provided socket head wrench to screw the 2 hexagon stop screws (05) that is the bottom of seat down in the dimension of 5*8mm.