To Teach You How to Install the Slow Close Toilet Seat
How to Install a Slow Close Toilet Seat
Everyone may be unfamiliar with the question of the toilet seat because the contents of the toilet are commonly used. But it may be more difficult for one to get the installation of the toilet seat. So let’s start with the toilet seat slow closing problem and teach you some ways to install the toilet seat slow closing Let’s (HomeRises) learn together!
The Role of the Toilet Seat Slow Close
1. Health protection: Because of the water pressure when flushing the toilet, a lot of bacteria can fly up. This is because people are used to pushing down the button, thus making the bacteria come up to them with all their enthusiasm.
2. Reduces odor: When flushing the toilet, cover the lid, this can effectively reduce the odor.
3. Reduces the flushing sound: When entertaining guests, or in an inconvenient situation, covers the toilet seat. This can effectively reduce the sound of rushing water.
4. Effective prevention of infections: Due to the cleanliness of the toilet seat, one person then change can thus prevent toilet users from infecting each other with infectious diseases. This also helps to effectively avoid the entanglement caused by squatting on toilet covers, skin diseases, venereal diseases, fall or injury.
5. Protects the obese and the elderly: The body resistance of the elderly is relatively weak. The smart toilet has a one-button automatic function, warm water cleaning, warm air drying out of the seat and automatically flushes water. It has a strong function but physically inconvenient for people who are not worried about toilet problems. Keeping a good clean body is good for your health.
 Purple |
 Silver |
 Blue |
Installation Steps for Toilet Seat Slow Close
First of all, prepare the materials needed to replace the toilet seat. There is mainly one set of toilet cover with fittings, including one set of toilet seat, two screws, two square tenors and two sets of nuts. At the beginning of the replacement, the screw fixing the toilet seat under the back side of both sides of the toilet is loosened first before the old toilet seat is removed. The two screws in the fitting are respectively inserted into the square mortise and then put into the iron shaft on both sides of the toilet seat. The screws on both sides are pointed at the screw holes on the rear and rear sides of the toilet. Tighten the screw according to the top and bottom position of the screw cap.
Depending on the materials used to fix the toilet seat, there will be different methods of replacement. In this case, the toilet seat is fixed with screws. But no matter what material is used, the method of replacement and installation is basically the same.
No wonder toilet seat slow close are so easy to install, mainly because there are not many steps to install the toilet seat slow close. All you need to do is basically solve the problem of slow closing the toilet seat.
Undermount Installation Type
1. Take the accessories out of the package
2. Fix the nut into the card slot
3. Slide the nut and adjust the position
4. Inset the toilet fixed hole
5. Put the gasket and tighten the nut
6. Installation complete
Uponmount Installation Type 1
1. Put the cover on the toilet, check if it is suitable
2. Pinch 2 pcs of plectrum, then hear a click
3. Pull it slowly and take out the base
4. Assembly screws according to orders in the picture
5. Right and left available to adjust, up and down available to adjust,
Adjust the distance and screw down
6. Inset the cover into the base, that is ok
Uponmount Installation Type 2
1. Take the toilet seat accessories down
2. Insert the screw into the mounting hole, twist to ninety percent
3. Put the toilet seat plumbed to the mounting hole and adjust the position
4. Take the toilet seat down and tighten the screws
Note: The above is the introduction of installation of toilet seats, and the products and accessories pictures in the passage are not from current product.
