Three important tips for installation:

1.Turn the cover into the unlocked position as the picture shown.

2.Press and hold the middle buttom for 5 seconds, to squeeze out the air inside.

3.Turn the cover into the locked position as the picture shown.

Note: 1) painting wall/emulsion paint/white wall;

2)wall paper;

3)Wood without painting or other ventilate material.

The suction cup is not suitable for the above position.

Installation methods:

1.Scrub and cleran the installation position and dry it.

2.Install the product, insert the card slot into the suction cup completely.

3.Please tear the clear protective film off before using.

4.Turn the cover into the unlocked position anticlockwise.

5.Press the center to the installation position by hand, that could squeeze out the air inside.

6.Press the cover by left hand in avoid of air reenters

7.Please start to use the mirror after 24 hours.

8.The suction cup has memory, if you want to use the mirror in other place, we can wash and cool the suction cup, then it can be used again.