Q: How to replace/adjust temperature limit?

A: Temperature limit stop type1 - single piece

1.Remove the handle, plate screws and escutcheon plate.

2.Pull the temperature limit stop out of fixture.

3.Rotate the temperature limit stop anticlockwise to lower the maximum temperature, or rotate the stop clockwise to increase the maximum temperature.

4.Push limit stop back to the valve.

5.Check the water temperature, and ensure that water temperature is not over 120°F, if the problem still exists, please go back from step 2 to step 4 in order to lower the maximum temperature.

6.Reinstall the handle, plate screws and escutcheon plate.

Temperature limit stop type 2 - single piece

1.Remove the handle, plate screws and escutcheon plate.

2.Pull the temperature limit stop out of the fixture.

3. Rotate the temperature limit stop anticlockwise to lower the maximum temperature, or rotate the stop clockwise to increase the maximum temperature.

4. Push the limit stop back to the valve.

Q: How to lower the maximum temperature of single handle pressure balanced bathtub faucets?

A: Adjust temperature limit stop

Q: If my single handle bathtub are leaking, how to fix it?

A：At the showerhead

1.Confirm water supply of faucet closed.

2.Replace the valve

At the handle

1.Check the screw nut to confirm it screwed down. If the problem still exists, please turn to step2.

2.Confirm water supply of faucet closed

3.Replace the valve.

Q: How to replace a bathtub spout?

1.Rotate and loosen the fixed screw of spout anticlockwise. (If possible, we can use the proper tool, such as wrench or cross screwdriver)

2.Slip off bathtub spout.

3.Replace new bathtub spout.

4.Reinstall fixed screw until fitting.

IPS bathtub spout

1.Rotate and loose bathtub spout anticlockwise by wrench or other technique.

2.Clean pipe threads and ensure the redundant thread seal tape removed completely.

3.Paint the thread sealant on the pipe thread.

4.Reinstall new bathtub spout.

Q: What tools do I need to install a faucet?

A: Some common tools include:

Basin wrench

Adjustable wrench

Silicone sealant

Channel locks

Screwdriver

Flashlight

Q: When do I need to use thread seal tape?

A: The thread seal tape is only used for kitchen pop-up tail parts and bathtub and shower valves with IPS connections.

Q: What is the finish of faucets for your website?

A: Homerises has brushed nickel, PVD, chrome, oil rubbed bronze, brushed nickel, antique brass, polished brass and etc, customers could choose various faucets for your house.